Install the radiator, you must understand the knowledge!

It's spring now. After buying a house and decorating it in time, you can hang it for a few months. When winter comes, you can live in your own house. Radiator installation is an important part of decoration. Before installing radiators, we need to do homework in advance to understand the knowledge of installing radiators.

How to install the radiator?

The installation of radiator can be divided into three types: open installation, concealed installation and semi concealed installation.

What are the main materials of radiator?

At present, the most mainstream radiators on the market are steel radiators, copper aluminum composite radiators, copper radiators and aluminum radiators.

Where is the best place to install the radiator?

The installation of surface mounted radiator shall follow the principle of "low is better than high", because the heat is emitted from bottom to top and the loss is small. Generally, the open mounted radiators are installed under the windowsill with low space utilization, which is not only conducive to the convection of indoor air, but also can heat the cold air penetrated from the window.

What is the height of the radiator?

The actual height of the radiator is called full height in the industry. Generally, it will be marked on the product. The common sizes are 600mm, 1500mm, 1600mm, 1800mm and so on. The height of the radiator placed under the windowsill depends on the height of the windowsill. Floor to ceiling windows and large floating windows are suitable for the installation of low-rise radiators.

Which kind of radiator should I choose for independent heating?

Family independent heating, it is recommended to choose a radiator less than 1.6 meters, otherwise the pressure of the wall mounted furnace may not be enough, resulting in poor heat dissipation effect.

Which kind of heater is the central heating?

In the case of central heating, users at the top layer can consider installing low-rise radiators. Users at the bottom layer suggest using high-rise radiators, and users at the middle layer can choose at will. This method is to consider the problem of heating pressure at home, so as to prevent the problem of radiator not being hot and bursting.